Solar panel: 7V/1.5W monocrystalline silicon
Pump parameters: 4.5-12V
Maximum flow: 180L/H
Maximum lift: 1M
How to use
1. Put the water pump into the water completely, with the nozzle on the water surface, make sure that the water pump is firmly fixed at the bottom of the fountain to avoid vibration.
2. Insert the jack of the pump into the jack of the solar panel output.
3. Place the solar panel in full sunlight, preferably directly facing the sun.
1.Be sure to put enough water in the fountain, especially on sunny days.
Always keep the pump below the water surface.
2.Change the water frequently, keep the water clean, and avoid any dirt obstructing the pump.
3.Take care to protect the solar panels to avoid any damage.
4.Please make sure that the solar panel is free from shadows and keep the filter inlet at the bottom free of debris.
5.This solar brushless water pump adopts high-sensitivity and low-power Hall elements, coupled with efficient and intelligent electronic circuit drive, and adopts the volute design in fluid mechanics for the impeller cavity.Reduce the resistance of the water flow, so that the overall performance is 20% higher than the efficiency of the traditional structure of the solar water pump. It also solves the shortcomings of current brushless solar water pumps that are difficult to start, low in efficiency, and poor in stability.
5.The water pump can be connected with various nozzles of different shapes to spray different water types.