Item type:solar car ventilator
Battery capacity: 1200mAh * 3
Applicable model: General
Charging mode: USB / vehicle / solar energy / power bank
Rotational speed: about 4500 revolutions
Solar location: outside the window
Color: black, white
Charging indicator: Yes
Application: heat dissipation, temperature control
Number of fans: 3
Instructions for Use:
Plug in the charging cable, the blue light starts flashing, and charging starts until the blue light is always on and the machine is fully charged.
When the green indicator light flashes, the solar panel starts to charge the battery.
The fan button can only be turned on after the main power is turned on, the machine starts to work, and the light bar button can be turned on or off as required.
Note: Before using the machine, it is recommended to fully charge the machine with a charging cable to activate the battery capacity.
How to Install:
1. First, open the door. Standing outside the car, pull the window down halfway and secure the short strip to the far right of the window.
2. After fixing the short strip, loosen the exhaust fan so that the solar panel and the exhaust fan form a certain angle. Overlap the groove of the exhaust fan with the window. Keep the exhaust fan close to the short strip, adjust the proper position and fix it.
3. Take out the strip and measure the length of the window on the left side of the exhaust fan. Cut out strips of the same length and fasten the strips to the windows to avoid gaps in the windows.
4. In the interior of the car, press the exhaust fan of the car on the window so that it matches the gap between the strips on both sides.
5. Slowly close the window on the exhaust fan by hand.
6. Adjust the angle of the solar panel so that it faces the incident angle of the sun. Fully illuminate the solar panel and charge the NiMH battery.
Car Fan * 1
USB Charging Cable * 1
Rubber Seal * 1
User Guide * 1
Note:Please make sure the product matches your car/motorcycle/bicycle before purchasing.