Model name: Sensor Light
There are three modes of 30 lamp full white light: 1: 10 lamp white light, 2: 20 lamp white light, and 3: 30 lamp white light
There are three modes of full white light of the 28 lamp: 1: light sensing + human body sensing is fully on, 2: light sensing + human body sensing is half on, 3: always on mode
Aluminum alloy housing:
1: 30 high brightness SMD LEDs
2: It is more convenient to charge with USB lithium battery without replacing the battery
3: Rechargeable battery capacity: 800 Ma
4: Use it 20 times a day and turn on the light for 15 seconds each time. It can be used continuously for about 2 months before charging
5: LED life: more than 30000 hours, LED brightness: more than 240lm
6: Sensing sensitive distance: up to 3m, sensing sensitive angle: 60 degrees horizontally and 30 degrees vertically
7: Three gear mode: white light mode, warm light mode, white light + warm light mode
"On" is on, and the human body sensor lights up in the dark
"Off" is off, and there is no sensing function at this time;
8: Product working environment temperature: 0 ℃ – 40 ℃
Working environment humidity: 5% – 93%
9: Working voltage dc3-4.2v
1. Secondary dimming mode: Press the  key to adjust the brightness: 10LED, 20LED, 30LED brightness, the indicator light turns green and flashes, and the human body movement can be detected under the night light. When a movement within the range of 10ft/120° is detected, the LED wall lamp will light up immediately. If no action is detected, the light will automatically turn off after 15 seconds.
2. Constant light mode: Press and hold the  button for three seconds, the indicator light turns red, and it stays on. You can use the wireless motion sensor LED light as a flashlight and desk lamp.
3. When the LED closet light flashes, it proves that the battery is low and needs to be charged.
4. Scope of application: This multifunctional cabinet light is very suitable for bedrooms, bedrooms, cabinets, corridors, workshops, basements, garages, stairs, fuel tanks, doors, garage entrances, hotels, camping, night reading and other places.
Note: When the LED wardrobe light flashes, it proves that the battery is low and needs to be charged.
5. Motion sensor mode:
(1). Do not install the 2 lights too close. The light may cause the other to not work.
(2). This light can only be turned on in a dark environment.
(3). PIR dimming mode: Press the  key to adjust the brightness: 10LED, 20LED, 30LED brightness, the indicator light flashes green, and human movements can be detected under night light. When a movement within 10 feet/120° is detected, the LED wall light will light up immediately. If no action is detected, the light will automatically turn off after 15 seconds.
Constant light mode: Long press the  button for three seconds, the indicator light flashes red, and the constant light mode is turned on. The wireless motion sensing LED light can be used as a flashlight and desk lamp.
6. Wireless installation: Magnetic LED lights, easy to install and remove, no additional tools required. Use the included 3M magnetic tape to stick it anywhere. When charging is needed, the light under the cabinet can be removed at any time.
The color deviation is subject to actual system configuration and slight dimension difference is allowed due to manual measurement.