Solar panel: 7V/1.4W monocrystalline silicon
Solar panel size: 205mm in diameter.
Pump parameters: DC 3-12V
Maximum flow: 180L/h
Maximum head: 100cm
Water spray height: 30–60cm, the height of the water spray will be different if different nozzles are connected.
When the solar panel receives sufficient sunlight, the water pump will start within 3 seconds.
1) Assemble the product according to the schematic diagram.
2) Place the solar panel in a suitable place to ensure that it is not blocked by other objects. When the solar panel receives sufficient light, the water pump works normally.
3) When the water pump is just put into the water, there is air in it, which may affect the spray effect. It is recommended to wait for the water pump to spray normally before connecting the spray head.
1 This product is a solar direct-drive water pump without an external battery. The height of the water spray depends entirely on the strength of the sun. When the sun is weak, the pump will not work continuously, but will automatically start repeatedly until the sun reaches a certain intensity The pump resumes continuous operation. When using, please place the product in unobstructed sunlight. Shading will affect the normal operation of the pump.
2 The pump must be completely immersed in the water, and it cannot be dehydrated for a long time. When the water pump is just immersed in water, because there is air in the water pump, it is recommended to insert the nozzle after the water pump is spraying normally.
3 Please keep the water source clean and clean the water pump regularly to prevent foreign matter from being sucked in by the water pump and causing the water pump to fail to work normally.